Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Parts Across Arvada
When an older door in Arvada gives out, the problem is usually a part that was never built to last this long. A 1950s ranch off Olde Town with the original wood single-car door, a split-level near Alta Vista whose extension springs finally snapped at 7 a.m., a south-facing apron frozen solid after a wet spring storm. Whatever brand is on your door, we know it. We get parts sourced, the problem diagnosed, and the door working again for homeowners across Arvada, and our technicians have up to 14 years of experience with exactly these legacy systems. Call (833) 608-4285 and we’ll get a technician moving your way.

Why Arvada Homeowners Call Lakewood Garage Door Repair Pros for Garage Door Parts
Older Arvada neighborhoods have their own parts vocabulary, and it matters that whoever shows up has heard it before. In ZIP 80002 and the streets running out toward Alta Vista, plenty of homes still carry original single-panel wood doors and the openers installed decades ago. Springs on those doors are past their cycle life, and the hardware underneath is often two or three generations behind what a newer house uses. We keep that era in mind before we ever knock.
What builds trust locally is knowing the difference between a part that’s tired and a part that’s been wrong from the start. A worn torsion spring, a cracked bottom seal, a roller that seized after a long cold snap. We tell you which one you have, what a replacement costs, and whether the door is still worth repairing. No redirect to a dealer, no guessing on arrival. Arvada homeowners call back because the diagnosis was clear and the price didn’t move.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Parts Services in Arvada
Five service categories sit under this roof: repair, opener repair, spring repair, installation, and parts. On a legacy door, the parts side is usually where you start. Our garage door parts team handles the specific components that fail first on older systems, and we can source what a 1960s or 1970s door needs without pushing you toward a whole new unit.
Torsion Spring Repair
Torsion springs do the real lifting on a sectional door, and in Arvada’s older single-car garages the originals have long since passed their working life. A snapped spring leaves a heavy door stuck halfway and dangerous to touch. One torsion spring typically runs $180 to $340, and most doors use a matched pair that’s replaced together.
Extension Spring Replacement
Many mid-century Arvada homes were built with extension springs running along the horizontal tracks. They stretch and fatigue differently from torsion springs, and old ones can fail with a hard snap. We replace them as a matched set and check the safety cables while we’re in there.
Cables and Drums
A frayed cable or a worn drum is often the reason a door slams down or drifts off level. Arvada’s freeze-thaw swings work the concrete apron and shift the door slightly, which puts extra strain on the cables over time. Cable repair here runs $130 to $250.
Rollers and Hinges
Seized rollers are one of the quieter failures on an older door. You hear the grinding before you see the problem, and steel rollers on a legacy door get rough fast in a dry, dusty climate. Roller replacement is $110 to $220, and new nylon rollers cut the noise immediately.
Trusted Brands We Service in Arvada
We’re factory-familiar with the brands actually installed in Arvada homes. LiftMaster and Chamberlain openers, Genie and Craftsman units, and doors from Clopay, Amarr, Wayne Dalton, and Raynor. That familiarity covers nearly every residential system you’ll find in the city. We don’t claim to stock parts, but we source what your door needs and get it to you quickly, whether it’s a Genie logic board, a Clopay panel, or a Wayne Dalton roller assembly. No redirect to a manufacturer hotline. Name the brand, and we’ll handle it.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Parts Problems We See in Arvada Homes
Arvada’s older housing stock drives a very specific set of failures, and most of them trace back to age, climate, or both.

- Original 1950s torsion springs past their cycle life. In ZIPs 80002, 80003, and 80004, single-car doors often still run the factory spring. After roughly 10,000 cycles it snaps, and the door is stuck. Replacement is the fix.
- Doors frozen to south-facing aprons after spring snow. The apron melts, refreezes, and grabs the bottom seal. Forcing the opener strips the plastic gears or burns out the motor. New seals and a smarter approach to the storm solve it.
- Missing photo-eye sensors on legacy doors. Many original 1950s doors in Olde Town and Alta Vista were never updated, and that’s a code violation on resale. Sensor installation is often the piece that turns a repair call into a safety upgrade.
- High-altitude sun cracking weatherstripping and paint. Intense sun degrades older steel panels and dries out seals faster than at lower elevations. Fresh weatherstripping and a bottom seal protect the door underneath.
After a wet spring snowstorm, the usual sequence plays out the same way. A south-facing apron in an older Arvada neighborhood melts and refreezes, and the bottom seal freezes to the concrete. A technician frees the door by hand, checks the torsion spring for fatigue, and frequently finds the original extension-spring setup has never been upgraded to photo-eye sensors. The typical fix combines a new bottom seal, a high-cycle torsion spring conversion, and safety sensor installation. That path brings an older door up to modern standards without a full replacement.
Pricing for Garage Door Parts in Arvada, CO
Parts pricing in Arvada follows the work, not a flat rate. The written estimate sets the final price, and you’ll see the number before any work starts. Typical estimated ranges for the most common jobs:
| Service | Typical Range |
|---|---|
| Torsion Spring (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Roller Replacement | $110 – $220 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
Most doors use a matched pair of springs, so a pair is about twice the single-spring range above. A seized roller set, a damaged panel, or a track knocked out of line by a heaving apron each change the total. We walk through the estimate line by line, and the price is quoted and agreed before we touch the door.
We Also Serve Cities Near Arvada
Our service area reaches beyond Arvada into the surrounding communities. If you’re in Wheat Ridge, Berkley, Westminster, or Sherrelwood, the same parts and spring work applies, and the driving distance doesn’t change how we diagnose a legacy door. Call and we’ll confirm timing for your address.
Serving Arvada, CO – Our Local Coverage Area
We serve Arvada and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Parts in Arvada
You can often replace just the torsion spring and keep the original door. A 1960s wood door in good structural shape usually gets years more service from a fresh spring and seal. If the panels are warped, the wood is soft, or the framing has pulled, we’ll tell you plainly. A single spring runs $180 to $340, and a matched pair is about twice that. Call (833) 608-4285 for a free estimate.
Your south-facing concrete apron melts during the day and refreezes overnight, gluing the bottom seal to the slab. It’s common on legacy drives around Olde Town and Alta Vista. Never force the opener when it happens, because the gears can strip. Call us and we’ll free the door and replace the seal.
Yes, safety sensors have been required on residential openers for a long time, and a 1950s door that was never updated is a code violation on resale. Many older Arvada homes fall into that gap. We install sensors as part of a repair visit. Call for an estimate.
A standard spring is rated for around 10,000 cycles, while a high-cycle spring lasts several times longer. On a heavily used door in Arvada, the upgrade pays off. Both fall within the $180 to $340 single-spring range depending on the door. Ask us which fits your door.
On an older Arvada door, it’s usually the springs. When they lose tension, the opener does the work it was never meant to do. Replacing the springs fixes the strain, though a worn opener may also need service. A technician can tell you which in minutes. Call (833) 608-4285 for a free estimate.
Whether you’re in a mid-century ranch off Olde Town or a newer build out toward the northwest, the parts under your door matter. Call Lakewood Garage Door Repair Pros at (833) 608-4285 for a free estimate. Parts sourced. Problem diagnosed. Door fixed. We also work with your insurer on covered repairs, and the price is agreed before we start.
Written by the team at Lakewood Garage Door Repair Pros.